Secure FTP (SFTP) access

Good News!

As of antman 0.5.0, you have SFTP access to your antsle and each antlet by default! Just use any FTP client such as the popular FileZilla!

SFTP to the antsle

Just use the credentials shown in the table below. You can use FileZilla's QuickConnect function.

Field Value
Host: sftp://myantsle.local
Username: root
Password: {yourpassword}
Port: 22
filezilla configuration

Filezilla: When the SFTP protocol is chosen the port will default to 22 unless a different port number is entered. See example below.

SFTP to a specific antlet

Note: if you configured a bridged virtual NIC, the following method will not work. You can SFTP directly to the IP address configured on the bridged interface.

To access antlet with IP address 10.1.1.12, use these credentials:

Field Example antlet 10.1.1.12 antlet 10.1.1.{num}
Host: sftp://myantsle.local sftp://myantsle.local
Username: root root
Password: {yourpassword} {yourpassword}
Port: 22012 22000 + {num}
filezilla configuration

Enjoy!